Re: Subject: Re: [CR]Another "odd" lightweight frame design.......

(Example: Framebuilders:Doug Fattic)

Date: Mon, 12 Aug 2002 14:26:17 +0100
Subject: Re: Subject: Re: [CR]Another "odd" lightweight frame design.......
From: "Bob Reid" <bob.reid1@virgin.net>
To: <classicrendezvous@bikelist.org>
In-Reply-To: <NDBBIHDFGPNNJEPNMGJBOEKGCMAA.hohnholt@mindspring.com>


Peter wrote ;
> Frame was "normal" when it left Rattrays. The extra stays were added later
> when the frame was turned over to touring use, possibly by a later owner.
> The work could have been done by Rattrays or by a local guy with a torch,
> but a later respray at Rattrays made it all look original.
> I had considered that might be the case, but the paint & transfers - including the original early '531 butted' transfer were still in place and it had that patina of a bike that old (The original clearcoat they used then, that I've seen on quite a few other frames turns soft and can almost be rubbed off by hand). That's not to say of course that the frame wasn't refinished by them at a slighter later date. One advancement on this is that I found the frame I'd seen this on before, and not a track frame - Alexander Von Tutschek's H.R.Morris on the CR website

http://www.classicrendezvous.com/British/Morris_AT_Red.htm

This has the same additional stay's but with a slightly different attachment to the seat tube.

Bob Reid
Stonehaven
Scotland