Re: [CR]Re: Tube removal

(Example: Production Builders:Peugeot)

From: <NortonMarg@aol.com>
Date: Mon, 3 Feb 2003 14:50:18 EST
Subject: Re: [CR]Re: Tube removal
To: BobHoveyGa@aol.com, classicrendezvous@bikelist.org


In a message dated 1/31/03 7:21:35 AM Pacific Standard Time, BobHoveyGa@aol.com writes:


> heat the joint then blast it
> with compressed air... it will drive all the braze out and leave you with a
>
> dry joint that you can just knock apart.

Would this not have the same effect on the tubing as letting it cool too quickly in a cold draft? It's my understanding that's the quickest way in the world to ruin tubing.
Stevan Thomas
Alameda, CA