[CR]Jack Taylor frame #6635

(Example: Component Manufacturers:Ideale)

From: "Paul Williams" <castell5@sympatico.ca>
To: <magpie@messengers.org>
Date: Thu, 27 Feb 2003 12:16:39 -0500
cc: Classic Rendezvous <classicrendezvous@bikelist.org>
Subject: [CR]Jack Taylor frame #6635

Joel and list,

I will post pictures later, but I just picked up a Jack Taylor frame from an i-BOB - #6653. Unfortunately it has been stripped of all of its paint. It has Brev. Campagnolo dropouts (rear driveside with der. hanger), Nervex Pro lugs - headset and seat-lug and a plainish bottom bracket stamped #11. There are braze-ons for shifters, water bottle, cable-guides under BB, and cable guide under chainstay. There is internal routing for rear brake cable through top-tube. The seat-stays are semi-wrap. The fork is oval in cross-section, Nervex semi-sloping crown. Both the crown and the rear-brake bridge are drilled for recessed brake-bolts. The serial number is stamped on the steering column and on one of the rear dropouts. Again #6635. The frame is 52.5cm C-T (seat-tube) and 56cm C-C (top-tube). It appears to have a relaxed geometry!

Any ideas on the model?

Paul Williams,
Ottawa, ON, Canada