Re: [CR]Race car brazing, silver etc.

(Example: Framebuilders:Doug Fattic)

From: <OROBOYZ@aol.com>
Date: Thu, 13 Mar 2003 01:27:52 EST
Subject: Re: [CR]Race car brazing, silver etc.
To: joebz@optonline.net, Philcycles@aol.com, classicrendezvous@bikelist.org


In a message dated 3/12/2003 10:45:26 PM Eastern Standard Time, joebz@optonline.net writes:

<< Per Dale's comment the bridges and dropouts (on Paramounts) have big fillets and have to be a different brazing alloy than the lugs. >>

Hey Joe: Why do you say that it had to be two different compounds? Brass could have accomplished that same job at both places as well as low-silver content brazing rod..

Let's see what Dave says!.

Dale Brown
Greensboro, North Carolina