[CR]Re Help Needed :Disassembling 3 piece hubs

(Example: Component Manufacturers:Chater-Lea)

From: "Pete Paine" <petebike7@btopenworld.com>
To: <classicrendezvous@bikelist.org>
Date: Wed, 23 Jul 2003 22:30:13 +0100
Subject: [CR]Re Help Needed :Disassembling 3 piece hubs

Brian I use a three legged automotive puller and find that will do most hubs. This can be used directly on small flange hubs using a little heat on the alloy. On rear large flange double sided hubs , screw on a cog and pull on that. On plain large flanges I made up a puller that worked though the large holes , again a little heat works wonders

Cheers Pete Paine Watford

---