Eureka !
Ah Ha !!
I knew that there was some basic , defining difference between the term "spindle" , and the term "axle" !
So , if wheels have fixed axles , around which hubs rotate ,
And , bottom brackets have spinning spindles , inside non-rotating cups and bottom-bracket-shells ,
What do pedals have ?
Raoul Delmare
Marysville Kansas U.S.A.
>
> In practice it's not that fussy. I have a GS triple spindle (spindles
> rotate, axles don't) with (gasp) Shimano cups and Campy cranks with a
Willow
> triplizer and it works fine. The drive side is 2 to 3mm closer to the CS
and about
> the same amount shows past the lockring. Not that fussy.
> Phil Brown
> Summer's here in San Rafael, Calif.