Re: [CR]Need info on Campy rims]

(Example: Component Manufacturers:Avocet)

From: "P. Lynn Miller" <lynnmiller@optusnet.com.au>
To: <dvancleve@cox.net>
References: <20031116155605.YSPT9010.fed1mtao08.cox.net@smtp.west.cox.net>
Subject: Re: [CR]Need info on Campy rims]
Date: Mon, 17 Nov 2003 07:12:27 +1100
cc: Classic Rendezvous <classicrendezvous@bikelist.org>

Speaking of Campy rims,

I just picked up a bike that have a set of 36 hole Campagnolo Victory Strada sew-up rims laced to a set of Suntour Superbe hubs. I have never messed with sew-ups before and am wondering whether I should take the leap or not spoil my innocence and keep riding clinchers. I have browse the archives and it seems that sew-ups are seriously liked or disliked and the each side holds their ground with a fair amount of zeal. I was thinking of putting them on Fugly, my fixed wheel bike.

P. Lynn Miller
Sydney, Australia


----- Original Message -----
From: dvancleve@cox.net
To: classicrendezvous@bikelist.org
Sent: Monday, November 17, 2003 2:56 AM
Subject: Re: [CR]Need info on Campy rims]



> Forwarding my reply to Tom to the list:
>
> > Hi Tom.
> >
> > My '87 Raleigh Scott Tinley Technium Trilite came with a full Campy Victory gruppo and these rims. The front rim got pretzeled when I was hit by a car in the early 90s (no real harm to me, ruined the front rim and left crank arm). The rear I still have. It has at least a few thousand miles on it, and has survived 2 broken DS spokes and 1 complete relacing. The anodizing shows some wear, but not much really. Mine are/were 32 hole and I have weighed from about 175-225 while I have owned them, so they are pretty sturdy and probably not particularly light...
> >
> > Doug Van Cleve
> > Chandler, AZ