[CR]dura ace AX pedal threading conversion ??????????????????????????????

(Example: Framebuilders:Bernard Carré)

content-class: urn:content-classes:message
Date: Mon, 17 Nov 2003 11:49:58 -0800
Thread-Topic: Classicrendezvous Digest, Vol 11, Issue 62
Thread-Index: AcOrQ9vI4VJEH8yKSUiE+kOVcKpBYQB/xHfg
From: "Craig Fenstermaker" <CFenstermaker@cryogen-inc.com>
To: <classicrendezvous@bikelist.org>
Subject: [CR]dura ace AX pedal threading conversion ??????????????????????????????

hi i've recently built a sweet 3 rensho with a DA ax grouppo. as with most vintage bikes i own, i prefer to ride using a modern pedal system to keep my knees happy. but the DA cranks use an oversize, ( at least when compared with 9/16" X 24 ), thread.

i could fab an adapter to use different pedals, but that would take a bit of time and i'm sure that this has been done before??????????????

anyone know of a commercially available adapter for this application? specifically one that will allow the use of a 9/16" X 24 tpi pedal in a DA ex crank.

thank you

craig g. fenstermaker
ams gynecology, ( formerly cryogen inc.)
10805 vista sorrento parkway
san diego, ca 92121
858.450.7405 voice
858.775.0858 mobile
858.450.3417 fax