Forgot this little detail
http://members.sparedollar.com/
Joe B-Z
GNNJ
> 54X57 c-c with a 102 mm wheelbase. I would point out this bike has a high
BB
> height so it will fit like a 55 or 56 cm. That's why it has a long campy
> post and the steel Cinelli stem to allow a longer extension.
>
> The parts are all suitable for a 1961 bike and are a good investment in
> themselves. There are numerous paint chips in the very inauthentic Cyclart
> repaint. All the bearings are repacked and the headset race surfaces just
> got treated to a Campy tool (thanks BVVW potentate), so the headset is now
> set up perfectly which was a problem I suppose from the time the bike was
> made. Typical Drysdale touches- Brazed on shifter mount- the whole thing!
> Double rear brake bridge for a rack mount. Untypical- a pretty good
brazing
> gap in the lower left head lug. Note the Wrights Autograph saddle has a
> tear. This is a candidate to go back to Tony Colegrave for repair in
> England.
>
> Spec:
> Almost certainly Reynolds 531 tubing but no decals
> Nervex Pro lugs and Campy Dropouts
> Stronglight 49 crank 38-52 w/ TA bb (later 38T ring)
> Lyotard alloy quill pedals
> Christophe special clips
> Campy Gran Sport Derailleur set
> Campy Record HF hubs, seatpost, shifters
> Mafac Dural Forge Brakes, old pattern levers and red hoods
> Fiamme red label rims, sewups
> Cinelli old logo bars and steel stem
> Regina freewheel, Wipperman chain
>
> $800 plus shipping
>
> Joe Bender-Zanoni
> Great Notch, NJ