Re: [CR]Universal brake questions

(Example: Racing:Wayne Stetina)

From: "Stephen Barner" <steve@sburl.com>
To: <classicrendezvous@bikelist.org>
References: <CATFOODacuevr6Z7bHR00002aeb@catfood.nt.phred.org>
Subject: Re: [CR]Universal brake questions
Date: Mon, 15 Dec 2003 20:14:16 -0500
cc: heine93@earthlink.net

I have a couple of these Universals in a parts drawer, each with one of the arms broken from a mechanic bending the arm with a wrench to toe it in. I seem to remember a tendency for squealing with them. I also have a broken Universal centerpull caliper from a Cinelli Mod B that I had and I am the fool who snapped it off. It was amazingly easy to do for a guy who had bent thousands of Weinmann arms without any problem. This was a standard adjustment on the Boom bikes we setup.

I would be very, very careful about bending those arms, and I would suggest spacing before tweaking.

--Steve Barner, Can't ride with 2' of snow on the ground, Bolton, Vermont


----- Original Message -----


> Date: Mon, 15 Dec 2003 17:11:09 -0500
> From: <raleighpro@dejazzd.com>
> To: <classicrendezvous@bikelist.org>
> Subject: Re: [CR]Universal brake questions
> Message-ID: <20031215221109.HDYO17581.de-fe01.dejazzd.com@de-fe01>
> Content-Type: text/plain; charset=ISO-8859-1
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Message: 12
>
> From: Jan Heine <heine93@earthlink.net>
> > Date: 2003/12/15 Mon AM 10:05:14 EST
> > I have a Universal rear brake, the sidepull with the extra arm. When
> > I mount it on the bike, the pads interfere with the seat stays.
> > Checking images of Universal-braked bikes, it appears that the arms
> > are bent slightly to provide clearance. Before I start bending - is
> > this correct?
>
> Jan,
> Do they look like these?
> http://ebay.com/<blah>
> Can you space them out from the bridge so the pads clear?

>

>

> Pete Geurds

> Douglassville, PA