Mark wrote:
>If I get a Cyclotouriste crank to replace my too high geared 53/42 SR
>crank will my campy SL pedals and the CycloT crank be compatible
>without forcing or messing up the threads of either cranks or pedals for
>future changes?
>
So long as the TA cranks are threaded 9/16 x 20tpi, you should have no
problem.
I'm running this exact setup on my Holdsworth Whirlwid fixie. The
threads are kinda tight- I may yet run a set of 9/16" pedal taps through
the cranks to loosen things up a bit.
David Benson
Auckland, NZ