Todd asked:
>>> Having serious slippage problems with Campy clamp-on D.T. shifters
mated to Nuovo Record derailer.I have the d-ring adjuster tightened to
the maximum tension and I'm still getting slippage under load.Anyone
have a trick or two up their sleave to fix this?<<<
And Steven added:
>>>This is usually indicative of the screw bottoming out before the
proper friction is reached, because it should theoretically be possible
to tighten the d-ring such that you can't even move the lever. I would
suggest grinding down the screw ever so slightly and
retightening......<<<
I agree with Steven's assessment of the problem, something I've also encountered numerous times. Another fix is to "shim" the assembly with an additional washer under the outer domed cap.
Wayne Bingham
Falls Church VA