Perhaps you can just remove the smallest fw cog?
AldoRoss
Middletown, Ohio
> I just tried to put a 120 mm rear wheel with a 5 speed freewheel into
an
> early 50's frame that measures 118 mm (?). The teeth on the 14t cog hit
the
> chainstay and therefore it doesn't turn. I can't move the wheel further
back
> because it is already against the gear hanger for the derailleur. Should
I
> start looking for a 4 speed freewheel? The frame did originally have a
derailleur
> because the brazed on fittings are there for the shift lever and the cable
> guides.
>
> Paul Patzkowsky Longmont, Colorado