Re: sdrawkcab R (was:Re: Robergel spoke heads, was [CR]PEUGEOT "trophy" wheel...

(Example: Component Manufacturers:Avocet)

Date: Sat, 03 Jan 2004 21:39:52 -0500
From: "HM & SS Sachs" <sachs@erols.com>
To: ABikie@aol.com
Subject: Re: sdrawkcab R (was:Re: Robergel spoke heads, was [CR]PEUGEOT "trophy" wheel...
References: <1ca.171c8ce5.2d28bd6c@aol.com>
cc: classicrendezvous@bikelist.org
cc: Wolfman231@aol.com
cc: classicrendezvous@bikelist.org

it would be neat to have a bestiary of spoke head "logos" on the/a web site. I certainly could photograph more than I can identify -- but ya'll have just seen that my memory is not infallible!

harvey sachs mcLean va

ABikie@aol.com wrote:
> In a message dated 1/3/2004 7:41:05 PM Eastern Standard Time,
> joebz@optonline.net writes:
>
> disliked every spoke mentioned here as far as breakage.
>
> At the time a dull looking zinc plated Torrington spoke beat them all.
>
> The Galvanized Unions wer OK too.
>
> What was good? Stainless Stellas. Any others?
>
> DT zinc were the greatest for strength, dull but not brittle
>
> union zinc too
>
> Larry black
> old spokes home
>
> Maryland