Martin, It sounds like you have a kit that helps a late 80's clamp on C-Record front der go around larger diameter seat tubes. The curved bars with the even holes gets added as an extra hing, and the rod gets used as the hinge pins. Have one of those kits sittin around somewere....
Garry Nold
Kent, WA
> Hi all
>
> I just picked up a few boxes of mixed items. In amongst them are some
> Campagnolo parts that I cannot identify.
>
> Probably off topic as they are sealed in a small plastic packet, so sorry
for
> this.
>
> Obviously spares for something. Two items packaged together. One is a
small
> steel rod. 60mm long with a diameter of 2.2mm. I would guess it is a "pin"
for
> something, but why so long? The other item is a small crescent shaped cast
> piece of steel. Overall length is 25mm, 3mm thick and 5mm wide, with
curved ends.
> This has 5 holes, diameter 2.5mm drilled along its length, slightly
counter
> sunk on one side. The holes are not evenly spaced.
>
> What are they for?????
>
> Regards
> Martin Coopland, Scotland, http://www.BatesBicycles.com