Re: [CR]curved (!!!) ta cranks on ebay

(Example: Events:Eroica)

Date: Mon, 03 May 2004 02:39:11 -0400
From: "Joe Bender-Zanoni" <joebz@optonline.net>
Subject: Re: [CR]curved (!!!) ta cranks on ebay
To: "joel metz, ifbma/sfbma" <magpie@messengers.org>, classicrendezvous@bikelist.org
References: <p0601020dbcbb45f3d694@[216.175.88.245]>


These are the only stupid part I have ever seen from TA. Any engineering student who doesn't draw a straight line for the moment arm gets an F.

Same thing with curvy Hetchins stays too.

Not much into PiMPy style.

This curvy stuff used to be part of stress relief in iron castings. Good riddance.

Joe Bender-Zanoni Great Notch, NJ

Yeah Dale- Just back from a mere 550 mile drive starting at 4PM!


----- Original Message -----
From: "joel metz, ifbma/sfbma"
To: classicrendezvous@bikelist.org
Sent: Sunday, May 02, 2004 8:43 PM
Subject: [CR]curved (!!!) ta cranks on ebay



> http://ebay.com/<blah>
>
> supposedly for a paris show in the 60s? it looks like the backside of
> the crank at the bb spindle hole is stamped in the same manner as ta
> cranks would be, and the shaping is similiar...
>
> i have a feeling these are going to go out of my range, but theyre
> damn interesting!
>
> -joel
>
> --
> joel metz : magpie@messengers.org : http://www.blackbirdsf.org/
> bike messengers worldwide : ifbma : http://www.messengers.org/
> po box 191443 san francisco california 94119-1443 usa
> ==
> i know what innocence looks like - and it wasn't there,
> after she got that bicycle...