[CR]Pics of 1974 Davidson

(Example: Framebuilders:Cecil Behringer)

From: <RDF1249@aol.com>
Date: Wed, 19 May 2004 13:22:52 EDT
To: classicrendezvous@bikelist.org
cc: rauler83@yahoo.com
cc: tjg@ltlink.com
cc: jimmycue@att.net
cc: solstice_mayonaise@speakeasy.net
cc: rauler83@yahoo.com
Subject: [CR]Pics of 1974 Davidson

Here are the pics of the mint condition 1974 Davidson I mentioned on the list last week. Measurements in cm are as follows: seat tube 55 to the top, top tube 55 c to c, chainstays 42.5, front center 57.5, bb height with 27 x 1 1/8" tires 27.5, Wheelbase 99.5, Standover height 80.5, bars 39 c to c, stem 8. Parts include Shimano large flange front hub, Shimano small flange rear hub 5 speed, Suntour 14-26 Freewheel, Cyclone derailleurs and shifters, SR bars and stem, Sugino Mity Tour crank 170 x 40/52, Araya copy of Weinmann dimpled rims, NOS IRC gumwalls, Unicamex seat, KKT Top Run pedals. Some of the parts must have come from another bike as they are worn, but bike itself looks like it rarely if ever got ridden. Original paint and decals. Frame is Reynolds 531. Three-hole cutouts in lugs were in homage to Bill's mentor, Harry Quinn. Bike was built in the back of Pine Street Cycle and most likely assembled there from the selection of parts.

Bob Freeman Seattle

http://f1.pg.photos.yahoo.com/ph/rdf1249/album?.dir=/120c&
urlhint=actn,del%3as,12%3af,0