RE: [CR]Dura Ace AX

(Example: Framebuilders:Doug Fattic)

From: "David Bilenkey" <dbilenkey@sympatico.ca>
To: "Classic Rendezvous" <classicrendezvous@bikelist.org>
Subject: RE: [CR]Dura Ace AX
Date: Tue, 21 Sep 2004 22:13:21 -0400
In-Reply-To: <20040922012220.5404.qmail@web81002.mail.yahoo.com>


On the top of the pedal. Have a look at the second pic:

http://www.classicrendezvous.com/Japan/Shim_AX_blvrs.htm

You'll notice it on the pedal. On the cranks it was on the arm's outer face.

David Bilenkey Ottawa, Ontario, Canada

-----Original Message----- From: Jerome & Elizabeth Moos [mailto:jerrymoos@sbcglobal.net] Sent: September 21, 2004 9:22 PM To: dbilenkey@sympatico.ca; Classic Rendezvous Subject: RE: [CR]Dura Ace AX

Were is the mark cast into pedals and cranks?

Regards,

Jerry Moos Houston, TX

David Bilenkey <dbilenkey@sympatico.ca> wrote: Jerry,

As with many of the AX/EX parts, the only difference was the mark cast into the part. That and perhaps a different colour strap. I seem to recall the AX pedals had a blue web/nylon strap (somebody correct me if I'm wrong here).

David Bilenkey Ottawa, Ontario, Canada

> -----Original Message----- > From: classicrendezvous-bounces@bikelist.org > [mailto:classicrendezvous-bounces@bikelist.org]On Behalf Of Jerome & > Elizabeth Moos > Sent: September 21, 2004 8:49 PM > To: rhandsfield; Classic Rendezvous > Subject: Re: [CR]Dura Ace AX > > > Speaking of Dura Ace AX, does anyone know how to tell whether a > set of Dyna Drive pedals or Dyna Drive cranks is Dura Ace AX or > EX? I never could tell them apart in regard to these two components. > > Regards, > > Jerry Moos > Houston, TX

_______________________________________________
      Classicrendezvous mailing list
      Classicrendezvous@bikelist.org
      http://www.bikelist.org/mailman/listinfo/classicrendezvous