Hi all, esp wheelbuilders, if anyone has done the following can they please contact me or the list. Looking forward to any comments on this......regards wayne davidson Invers NZ.......
Get a Campagnolo record small flange road hub 126mm spacing, remove the axle and turn around so that the hub now has the offset biased to the drive side, install a pista/track cog and fine tune the offset to allow proper driveline alignment when fitted to a road frame, if you have done this and ridden this wheel, was the final result acceptable, as to having a strong wheel without the horrible flat driveside, or do you feel that the wheel would have been better with a little bit more width across the flanges?