Re: Re: [CR]16 mm sockets....

(Example: Framebuilders:Norman Taylor)

From: <gpvb1@comcast.net>
To: classicrendezvous@bikelist.org
Subject: Re: Re: [CR]16 mm sockets....
Date: Fri, 03 Dec 2004 22:47:07 +0000


Date: Fri, 03 Dec 2004 10:56:47 -0600 From: "John Everett" <jeverett3@earthlink.net> To: classicrendezvous@bikelist.org Subject: Re: [CR]16 mm sockets....

On 2 Dec 2004 at 16:15, John Thompson wrote:
> John Everett wrote:
>
> > Sears Craftsman, Part Number 44311. 3/8" drive, 12 point. Works
> > just fine on my Stronglight cranks, don't know about Zeus.
> JT:
> The old Stronglights have a slightly larger diameter (23.5mm vs 22mm on
> the Zeus) so you'll have a bit more clearance for a thicker socket. I
> think someone else mentioned that they had to thin the OD of their
> Craftsman socket to fit in a Zeus crank.

JE: OD of the above socket is 21.8mm.

John Everett - Aurora, Illinois John: I just measured the I.D. of the crankarm thread to be about 20.8mm, so that's why that socket won't fit..... Machine off maybe 0.75 mm all around, though, and it'll work. Greg "dig my Craftsman sockets, but they aren't super-thin-walled" Parker Ann Arbor, Michigan