If anyone needs the clamp bolt on Cinelli stems, I started to make them. These are the short bolts with the rounded polished face. Mine don't have the little nub that fits in the slot on the stem and keeps the bolt from turning when you tighten the nut, so if the expanding pressure from the bar is not enough to keep the bolt from turning, you can use a small star washer.
Dennis young
Putting the lathe I salvaged at the scrap yard to use in Hotaka, Japan
>
> Garrett,
>
> There are Steel Cinelli track bars with stems in 3 different amounts of drop.
> Cinelli also made Alloy bars #67 for track and stems with some drop also. 3TTT
> made the same, with stems it 2 or 3 different drops. I bought some deep drop
> 3TTT track bars and stems from the Medici guys at a swap meet several years
> ago. Those or Cinelli alloy are original to the bike. I'm sure there is some
> out there for saleI personally guard my track bars and stems with my life. I
> have a lot and that's probably not enough. Hopefully others out there are not
> as stingy as I am with track stuff.
>
> Brian Baylis
> La Mesa, CA
> I