I have a bunch of used parts for sale. Prices do not include shipping. If you see items you are interested in, please give me your zip code so I can confirm the USPS cost. Unless you tell me, I'll be assuming you want Priority shipping. This list will likely show up also on the BOB list, with non-time-line items. Here goes:
Deraileurs:
Front:
Campy, NR, has the post 78 lip on the outside front of the cage. This one is worn but I bet would be fine for a vintage beater. $15
Campy, NR, has the post 78 lip on the outside front of the cage. Bette condition than the one above. $20
Suntour Cyclone, endless band. $5
Shimano 600, for double, probably early/mid 80s. Good condition. $10 (see below for mate for rear)
Rear: Shimano 600, short cage, probably early/mid 80s. Good condition. $15 (see above for mate for front)
Brakes:
Calipers:
Dia-Compe Royal Gran Compe, short reach, allen fitting. Pads still have some useful life. $45
Levers:
Campy Record, levers, no hoods, some road rash. On one it's pretty minor, on the other it's not awful but won't take much close inspection to see it. $25
Clamps:
Campy down tube double cable guide clamp for near BB. New. $10
Pedals:
Campy record pedals. Left has some obvious road rash but these would be quite nice still for a vintage beater bike. $25
Hubs:
Campy Gran Sport hubs, front and rear. These look like the NR hubs but do not have the oil ports/clips, don't have the same finish as the NR hubs, and the skewers don't use the acorn nut on the end of the cam, but still look decent. British threading, 126mm OLD, 36 hole. $30
Campy NR rear, 126 OLD, British threading w/skewer. 36 hole. $25.
Campy NR rear, 126 OLD, Italian threading (I understand that this still works fine when using a british threaded freewheel). w/skewer. 32 hole. $25.
Campy NR front, 36 hole. $25
Phil Wood, old style, front. 36 hole. $25
Campy record rear, 126 OLD. This is the style that came after the NR I think (and may be out of CR timeline, but I don't know my campy time line that well). 36 hole. Very good condition, and appears never to have been built. $30
Stems:
Cinelli 1A, 120mm reach. (I bought this a while back, being told it was really, really clean and in great condition. It wasn't). $5
Cinelli 1R (I must admit I get the designations of the 1R and the other, non 1A confused. This is the one with the internal binder). Silver, 95mm reach. Very clean. $15
Cinelli (same model as above), 110 mm reach. Very clean 110 mm reach. $15
Wheels:
Front and rear, Campy Highflange, British threaded, 126mm OLD rear, 28 hole, laced to grey MA40s, with very, very little sidewall markings. $100
Tools:
Suntour freewheel bearing spanner for the New Winner. This is the freewheel with the bearing adjustments on the front of the freewheel. $10
Freewheels, cogs:
I have used, but good condition Winner bodies, and lots of new, unused cogs. If you have a particular 5, 6 or 7 speed arrangement you'd like set up, contact me to see if I have the right cogs for you. If you are only in need of individual cogs for the Winner, New Winner and Winner Pro contact me about that too. Be aware that a few cog sizes are pretty rare these days.
rob hawks
richmond, ca