RE: [CR]Headbadge restoration

(Example: Books)

From: "Mark" <rena.cutrufelli@comcast.net>
To: <OROBOYZ@aol.com>, <rhawks@lmi.net>, <classicrendezvous@bikelist.org>
Subject: RE: [CR]Headbadge restoration
Date: Mon, 20 Sep 2004 23:13:40 -0400
In-Reply-To: <100.1c89358.2e8072b2@aol.com>


Dale as a teen I had a friend who did just this same paint restoration operation with vaseline on bikes and even on the face of a Hallicrafters shortwave I bought from him. He used a very fine brush. I can tell you that he was very patient and the results were great-border defintion was sharp as can be!

Mark Cutrufelli Laurel,MD

-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of OROBOYZ@aol.com Sent: Monday, September 20, 2004 1:52 PM To: rhawks@lmi.net; classicrendezvous@bikelist.org Subject: Re: [CR]Headbadge restoration

In a message dated 9/20/2004 1:00:12 PM Eastern Daylight Time, rhawks@lmi.net writes:

<< Since it's only the raised sections that get painted black, would there be some way to roller it? Do I paint it all and then remove the unwanted paint? Would I wax it, then remove the wax from the high spots, paint, then remove the wax? Any ideas? >>

When I was in the Navy in John Kerry swift boat days (!) we used to paint stuff by prepping thoroughly, then, using small paint brush & great care, covering the surface not to be painted with Vaseline! Then spray paint. Let dry & wipe off, VIOLA!

Dale Brown cycles de ORO, Inc. 1410 Mill Street Greensboro, North Carolina 27408 336-274-5959 fax 336-274-6360 <A HREF="http://www.cyclesdeoro.com">cyclesdeORO.com</A> <A HREF="http://www.classicrendezvous.com./main.htm">ClassicRendezvous.com< /A>