Hi all!
Last call on the Cyclus tooling, to those who has jumped on board we'd like to thank you very much, these sales has help in more ways than anyone could ever imagine! Anyway I'll be away for a road trip!.....We've located a nice stash of old goods, nothing super exotic but good old bike stuff that fits into our game plan.
So here it is one more time for those who has been pondering, yes or no. The price increases will be going into effect this weekend, example is as follows.
item ( 3 ) Current CR offer price $ 79.- Current list @ http://www.renaissance-cycles.com $ 119.50.......New list $ 149.-. Yes it's quite a big difference. Ebay prices will be rising as well.
Bottom line we were using this offer to move more cyclus tooling than we would normally move. We were hoping to use this as little bit of leverage in order to have these tools ( Maked ) with the country of orgin. Without this, importing these tools into the U.S would be very hard and if so then the prices would be much higher, duties, fees and so on. Show and tell is what the game plan was all about, you scratch my back and I'll scratch yours................................I think we showed them.
What orders rolls in before the weekend we'll still be honoring these prices.
Thanks,
BC
Baron C.....................And the gang!!
Renaissance cycles,
Eindhoven Holland.
> Hi All!
>
> Several list CRers has been asking about Cyclus tooling so decided to send
> it
> to the list one more time with a few updates.
>
> DO NOTE: This offer is good until the end of the month 9 / 30 / 04.
>
> Tooling offer is of tools that used for the repairs of bicycles that fits
> into the timeline
> of the CR LIST! If other CYCLUS tools are of interest then do let us know
> and I'll
> see what we can do. BTW: This is the time to acquier these types of
tooling.
> Once in the
> U.S the cost will be jumping quite a bit over our the current prices on
our
> site
> @ http://www.renaissance-cycles.com . It's fair to say we might be seeing a 25%
> increase
> of these tools once they are imported into the U.S.
>
> Here' the list...................................All tools are in stock.
> (1) # 720001, Steer tube threading tool, 1" $ 55.- .......... Regular
> list $ 79.50
>
> (2) # 720003, Fork crown race cutter 1" - 26.4 mm $ 50.-
> .............Regular list $ 74.50
>
> ( 2-A ) # 720048, fork crown race cutter 27.0 $ 50.-
> Regular list $ 74.50
>
> (3) # 720005, Head tube reamer/ facing tool 1" $ 79.-
> ....................Regular list $ 119.50
>
> ( 3-A ) # 720025, 1'' reamer / facer cutter only $ 74.-
>
> ( 3-B ) # 720026, 1 1/8'' reamer / facer only $ 74.-
>
> (4) # 720007, Bottom bracket facing tool with English and Italian threaded
> guides $ 79.-.......Regular list $ 119.50
>
> (5) # 720008, Bottom bracket threading tool, English $ 55.-
> .....................Regular list $ 79.50
>
> ( 5-A ) # 720140 Bottom bracket ENGLISH threading tool. Pro set with 6
lines
> of cutters $ 89.-
> Regular list $ 125.-
>
> (6) # 720029, Bottom bracket threading tool, Italian $
> 55.-...................Regular list $ 79.50
>
> ( 6-A ) 72041, Bottom bracket ITALIAN threading tool. Pro set with 6 lines
> of cutters $ 89.-
> Regular list $ 125.-
>
>
> (7) # 720009, Headset press $ 28.-.......................Regular list $
> 54.-
>
> 8) # 720010, Gear hanger alignment tool $ 23.- ..............Regular list
> $ 34.50
>
> (9) # 720011, Drop out Alignment tools (Pair!) $ 38.- .............Regular
> list $ 54.50
>
> (10) # 720012, Fork Crown Race fitting tool $
> 23.-....................Regular list $ 34.50
>
> (11) # 720013, Fixed head cup removal tool $
> 24.-....................Regular list $ 35.-
>
> ( 12 ) # 720097, 27.2 seat tube reamer $ 28.-
>
> ( 13 ) # 720096, 27.0 seat tube reamer $ 28.-
>
> ( 14 ) # 720095, 26.8 seat tube reamer $ 28.-
>
> ( 16 ) # 720094, 26.2 seat tube reamer $ 28.-
>
> ( 17 ) # 720061, seat tube reamer handle $ 32.-
>
> ( 18 ) # 720057, Axle vice $ 24.-
> Regular list $ 29.50.
>
> ( 19 ) # 720031, frame guage ( Steel handle ) NoWHIMPY alloy handle! $
24.-
> Regular list $ 29.-.............Beware S/H will be some what on the high
> side.
>
> If in need of pricing on another Cyclus tool item let me know and I'll see
> what I can do for you. Payment, Paypal is best but we'll take CC# as well!
> Let me know, till then you all have a great day.
>
> BC
> Baron C...........And the gang!!
> Renaissance-Cycles
> Eindhoven, Holland