[CR]Help: how to smooth out and shine up rough seatpost

(Example: Framebuilders:Tubing:Columbus)

From: "Doug Van Cleve" <dvancleve@cox.net>
To: <classicrendezvous@bikelist.org>
Date: Wed, 8 Sep 2004 14:17:43 -0700
Subject: [CR]Help: how to smooth out and shine up rough seatpost

Howdy folks.

I have a well used Campy seatpost that I want to make as presentable as possible. I am thinking that I should carefully file out the gouges as best I can above the min. line, then wet sand with say 400 grit followed by something finer and then metal polish. Does that sound about right? Is there a best way to do this? This post isn't particularly valuable, but I have it and it is correct for the rest of the parts.

Thanks,

Doug Van Cleve
Chandler, AZ