Re: [CR]Wood Rollers

(Example: Production Builders:Frejus)

From: "John Pergolizzi" <jtperry1@verizon.net>
To: "Peter Koskinen" <peter@prkbikes.com>, <PBridge130@aol.com>
References: <20050121211416.YSKI1983.imf16aec.mail.bellsouth.net@gateway>
Subject: Re: [CR]Wood Rollers
Date: Fri, 21 Jan 2005 17:12:19 -0500
reply-type=original
cc: classicrendezvous@bikelist.org

All, Look up some MTD wooden rollers from the 70's first. They were as good as it got then. Well, Weyless was just as good, but not wood. The wood adds extra heft, so as to add resistance. More weight to the barrel so to speak. Those MTD's had gold anodized aluminum sides. But Weyless had steps! I found the taper more annoying then any thing else. Plop a piece of black electrical tape down the center of the front roller and it's all the visual stimulus you need to stay in center.

John T.Pergolizzi Brooklyn,N.Y. Too much time in the old days, in the basement, on ROLLERS.


----- Original Message -----
From: Peter Koskinen
To: PBridge130@aol.com
Cc: classicrendezvous@bikelist.org
Sent: Friday, January 21, 2005 4:14 PM
Subject: RE: [CR]Wood Rollers



> I'm talking about Tapered Maple Laminated Hardwood rollers here. Kreitler
> Rollers are $290 and up depending upon whom you buy them from.
>
> Peter Koskinen
> Chapel Freezing Hill, NC
>
> _____
>
> From: PBridge130@aol.com [mailto:PBridge130@aol.com]
> Sent: Friday, January 21, 2005 3:44 PM
> To: peter@prkbikes.com
> Subject: Re: [CR]Wood Rollers
>
>
> In a message dated 1/21/2005 12:46:13 PM Mountain Standard Time,
> peter@prkbikes.com writes:
>
> Does anybody have an opinion on these and if the response is
> favorable, should they be fairly easy to sell?
>
>
> Cost, cost, cost. Kreitler seems to stay in business, but I don't think
> that many rollers are sold overall. Plus, it's hard to show off your cool
> wood rollers.... lowered ego factor. I'd be very cautious.
>
> Retail under two hundred bucks? Maybe.
>
> Cheers,
>
> Peter
> http://www.incredimail.com/index.asp?id=54475 Add FUN to your email -
> CLICK HERE!