[CR]Sheared dropout adjuster

(Example: Framebuilding:Tubing:Falck)

From: "peter geldard" <peter.geldard@virgin.net>
To: <classicrendezvous@bikelist.org>
Date: Mon, 5 Dec 2005 22:59:18 -0000
Subject: [CR]Sheared dropout adjuster

Has any of the list members had any experience if removing a sheared dropout adjuster screw? This one is sheared flush with the rear of the dropout and has about 1/2 inch left sticking through inside the dropout where the axle goes.

Thanks in advance

Pete Geldard
Surrey
U.K