Well folks,
Anyone guessing Phil Wood was correct :^) I found my Phil tool and sure enough it fits. Now to loosen up the crud holding in the cups...
Thanks,
Doug Van Cleve Chandler, AZ
On 11/28/05, Doug Van Cleve <dvancleve@gmail.com> wrote:
>
> Folks,
>
> I should probably have mentioned that this donor bike has/had full Campy
> N-R except for the hubs (Normandy Luxe Competition high flange) and this
> BB. I would therefore have assumed that the BB was considered to be bett
er
> than the Campy I was expecting to see there.
>
> Doug Van Cleve
> Chandler, AZ
>
>
> On 11/27/05, Doug Van Cleve <dvancleve@gmail.com> wrote:
> >
> > Howdy folks.
> >
> > I picked up a parts donor bike to build up the Silk Hope I get through
> > Dale and it has some kind of splined BB that appears to be original. I
t
> > doesn't use the current Shimano splined tool and doesn't look like Phil
> > Wood either. I can't find my Phil BB tools, but I recall them being so
rt of
> > rounded/scalloped and this one has thin square notches more like a Shim
ano.
> > Any ideas on what it might be and what kind of tool will remove it?
> >
> > Thanks :^)
> >
> > Doug Van Cleve
> > Chandler, AZ