What's left protruding into the axle slot? If there's any screw head left, I'd let a penetrant work overnight then go at whatever is still protruding, using a needle-nose Vise-Grip if necessary and working it back and forth if needed to prevent shearing off the precious remains of the protruding portion.
David Snyder
Auburn, CA usa
> Has any of the list members had any experience if removing a sheared
> dropout adjuster screw? This one is sheared flush with the rear of the
> dropout and has about 1/2 inch left sticking through inside the dropout
> where the axle goes.
>
> Thanks in advance
>
> Pete Geldard
> Surrey
> U.K