Snap-On makes a nice long 1/8 inch drift punch that works well. Use a QR
axle with a cone on it in an axle vise so that you can have support to push
it straight through. When you re-assemble it, ber very careful not to push
the ears to close to the pivot arm, or it will bind.
Good Luck,
Earle Young,
Madison, Wi.
> What's the best way to go about changing out the cage on a NR front
> derailleur? It all looks pretty straightforward except for the pin on the
> upper pivot. I was going to file down one side of the pin a bit and knock
it
> out with a drift. Then hopefully re-use it, swedging the filed side once
in
> place. Is this the proper way to go about it? Any tips or tricks from you
> old time wrenchs would be appreciated.
>
> Thanks much, Jon Williams
> Grants Pass OR
>
>
> ------------------------------
>
> Date: Wed, 23 Mar 2005 16:39:14 -0800
> From: <velorosso@charter.net>
> To: <Classicrendezvous@bikelist.org>
> Subject: [CR]For sale: Campag Rally Rear Mech
> Message-ID: <3rr89i$qaemef@mxip16a.cluster1.charter.net>
> Content-Type: text/plain; charset=ISO-8859-1
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Message: 14
>
> I've listed some stuff on SF Craigslist:
>
> A later-style Campagnolo Rally rear mech. $70 shipped. Here is the link:
>
> http://www.craigslist.org/
>
> I also listed:
>
> 1971 Campag NR front and rear derailleurs, riders, good, certainly not
excellent condition. $60 shipped for the pair.
>
> http://www.craigslist.org/
>
> Lastly an early 70's Campag seat post, 27.2 good condition, not a
show-piece, scratches on the lower parts. $35 shipped.
>
> http://www.craigslist.org/
>
> Thanks for looking. John.
>
> John Siemsen San Luis Obispo, CA
>
> ------------------------------
>
> Date: Wed, 23 Mar 2005 19:41:49 -0500
> From: "Peter Koskinen" <peter@prkbikes.com>
> To: "'r garni'" <crispyflotilla@yahoo.com>
> Cc: classicrendezvous@bikelist.org
> Subject: RE: [CR]USA TODAY SAYS: OUI! to Derosa
> Message-ID: <20050324004150.SGXL2063.imf21aec.mail.bellsouth.net@gateway>
> In-Reply-To: <20050323200202.96694.qmail@web20427.mail.yahoo.com>
> Content-Type: text/plain;charset="us-ascii"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Message: 15
>
> Serrottas are nice if you can afford them. Personally I'd buy a Landshark
> from John Slawta or a frame from Peter Weigle before I even thought about
a
> Serrotta.
>
> Peter Koskinen
> Chapel Hill, NC USA
>
> -----Original Message-----
> From: classicrendezvous-bounces@bikelist.org
> [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of r garni
> Sent: Wednesday, March 23, 2005 3:02 PM
> To: OROBOYZ@aol.com; classicrendezvous@bikelist.org
> Subject: [CR]USA TODAY SAYS: OUI! to Derosa
>
> Hello Everybody,
>
> Nice long article about Serotta and the trendy road bike in today's USA
> TODAY. Kerry rides one! Robin Williams rides one! And Thank God, Jessica
> Seinfeld (Jerry's wife) rides one too!
>
> Of interest to the group might be David Herlihy's quote at the bottom of
the
> article, after all mention of the Ottrott, 5900 Superlight, Madone, etc.
> Here's the quote:
>
> " My favorite remains my 1983 De Rosa...I'm frozen in time. Like Rip Van
> Winkle. Clearly, some of the fancy materials make a difference, but my De
> Rosa is still very fun to ride."
>
> And he even managed to squeeze into the timeline!
>
> Tell me, is David (author of BICYCLE: A HISTORY) on this list? Pardon my
> ignorance if he is. (Actually, pardon it anyway.)
>
> Ricky Garni
> Carrboro, NC
>
> Also a little plug for Carrboro's Cycling Specifics in the article, where
> they fit you, it looks like, over the course of a month or two.
>
> Yes, I do read USA TODAY. It is the intellectual in me, the one that likes
> pretty colors.
>
>
> --- OROBOYZ@aol.com wrote:
> > In a message dated 3/15/2005 3:52:15 PM Eastern Standard Time,
> > OROBOYZ@aol.com writes:
> >
> > << lus the 2004 theme, bikes of Italy! >>
> >
> > Supposed to be "2005 Theme, Bikes of FRANCE!"
> >
> > Dale Brown
> > Greensboro, NC
> > _______________________________________________
> > Classicrendezvous mailing list
> > Classicrendezvous@bikelist.org
> >
> http://www.bikelist.org/
> >
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Small Business - Try our new resources site!
> http://smallbusiness.yahoo.com/
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/
>
>
> ------------------------------
>
> Date: Wed, 23 Mar 2005 19:49:54 -0500
> From: HM & SS Sachs <sachs@erols.com>
> To: Classic Rendezvous <classicrendezvous@bikelist.org>
> Subject: [CR]FS: LeJeune frameset
> Message-ID: <42420EB2.4030201@erols.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Message: 16
>
> I'm posting this on behalf of an acquaintance:
>
> LeJeune frameset and some parts, ~1969, all 531 DB (I think, decal bad),
> seems to be metric tubing (seat post ~ 26.2 - 26.6, not stuck; seat tube
> <28.6). Roughly 57 ctc, 57 top. Red, chrome stays, decals except
> Reynolds presentable. Lovely lugs and top eyes on seat stays. May clean
> up really nicely. Simplex (?) ends. Said to have been ridden very
> little, belonged to his father. Includes Stronglight 93 cranks, a
> headset, junky 27" rear wheel w/o QR assy, Simplex front and Campag
> "Gran Turismo" rear (the infamous boat anchor) derailleurs. Terms:
> Available at my house (WashDC area) or will transport to Cirque. I will
> not pack and/or ship, and doubt the owner is interested in the hassle,
> either. $160. Yes, I'll take a couple of "digipix" if you are really,
> really, interested.
>
> I have no financial interest in this bike, but hope to make a seller and
> a buyer happy.
>
> harvey sachs
> mcLean va.
> ------------------------------
>
> Date: Thu, 24 Mar 2005 02:52:25 +0100
> From: Matteo BRandi <bees.bfg@tin.it>
> To: CR LIST <classicrendezvous@bikelist.org>
> Subject: [CR]Campy 3 pcs hubs for sale
> Message-ID: <BE67DBE9.6EA%bees.bfg@tin.it>
> Content-Type: text/plain; charset="US-ASCII"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Message: 17
>
> Hi all
>
> I have 3 NOS CAMPy 3 pcs hubs for sale,like this one:
> http://ebay.com/
>
> 50 shipped each
>
> Thanx
> Matteo"..Cirque is gettin closer,what should i bring?.." Brandi FIrenze
> Italy
>
> ------------------------------
>
> Date: Wed, 23 Mar 2005 21:01:16 EST
> From: FujiFish1@aol.com
> To: classicrendezvous@bikelist.org
> Subject: [CR]Need: 16mm or longer spoke fasteners
> Message-ID: <fc.fa01537.2f73796c@aol.com>
> Content-Type: text/plain; charset="US-ASCII"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Message: 18
>
> For rebuilding Campy 50th Anniversary hubs back onto their first mated
wood
> tubular rims from 1983, I require:
> Brass, 14g spoke nipples in a length of 16mm minimally, or perhaps
just a
> bit longer.
>
> They will be paired up with DT spokes, on 32 hole rims. Enough for two
SETS
> (4 wheels) would be great, but I NEED enough for one set. Thanks very
much
> for any help or leads...
>
> Ciao,
> Mark Agree
> Southfield MI
>
>
> ------------------------------
>
> Date: Wed, 23 Mar 2005 21:21:58 -0600
> From: "Galen" <gvpoole@bellsouth.net>
> To: <classicrendezvous@bikelist.org>
> Subject: [CR]Fiorelli decals
> Message-ID: <000801c53020$a398bd30$6101a8c0@MainPC>
> Content-Type: text/plain;charset="iso-8859-1"
> MIME-Version: 1.0
> Content-Transfer-Encoding: quoted-printable
> Precedence: list
> Message: 19
>
> I have decided to repaint my '73 Fiorelli. I received it from a friend
> who had painted it about 25 years ago, and it hasn't fared very well
> over the years. It has never had decals since I have owned it, and
> although the "new" paint is worn pretty badly, the frame is free of
> dents or rust. I discovered the original color under the new paint, and
> have decided to return it to the orginal color.
>
> I am not sure if the bike is a Fiorelli, or a Coppi-Fiorelli. How can I
> tell the difference? Does anyone have access to head tube and frame
> decals, or does anyone have the expertise to reproduce decals? I would
> appreciate any help you all can give me--I really enjoy this old bike,
> and it needs a little help to resurrect it from its scruffy condition.
>
> Thanks in advance,
>
> Galen Poole
> Jackson, MS
>
> ------------------------------
>
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/
>
>
> End of Classicrendezvous Digest, Vol 27, Issue 99
> *************************************************
_______________________________________________
Classicrendezvous mailing list
Classicrendezvous@bikelist.org
http://www.bikelist.org/