RE: [CR]Re: 26.0 handlebar for 1975 MASI Gran Criterium

(Example: Framebuilders:Norman Taylor)

From: "Ken Freeeman" <freesound@comcast.net>
To: "'john jorgensen'" <designzero@earthlink.net>, <classicrendezvous@bikelist.org>
Subject: RE: [CR]Re: 26.0 handlebar for 1975 MASI Gran Criterium
Date: Tue, 24 May 2005 07:24:47 -0400
Thread-Index: AcVfSMXBHwD3CJ8tSmyChpQeAdZgvgBCg6NQ
In-Reply-To: <BEB69E33.18F0%designzero@earthlink.net>


Nice TTT and Ambrosio bars show up on Ebay. Dale Phelps has sold a number of them, a very nice bend and seems NOS. They're going on my '80 Masi. Only issue is that on my set the center diameter is more generous, more like 26.4 than 26.0 or 25.8.

Ken Freeman Ann Arbor, MI

-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of john jorgensen Sent: Sunday, May 22, 2005 11:38 PM To: classicrendezvous@bikelist.org Subject: [CR]Re: 26.0 handlebar for 1975 MASI Gran Criterium

The stem referenced in the wooljersey image is a ttt. The bars of that period were bulge formed at the center, original were stamped Masi. About the widest will be 42cm.

Late Cinelli bars will fit as they too are 26.0mm. Can be found up to 44cm for sure, perhaps wider. The chances are good that a Cinelli bar of 44cm or more will have the smaller clamp diameter, many folk cannot measure the .4mm difference accurately if not purchasing in person.

If looking on ebay, 3ttt is often used as a title, rather than ttt.

John Jorgensen
Palos Verdes Ca