[CR]FS: Ofmega Cranksets......

(Example: Framebuilders:Alex Singer)

From: <DTSHIFTER@aol.com>
Date: Sun, 11 Sep 2005 12:45:48 EDT
To: classicrendezvous@bikelist.org
Subject: [CR]FS: Ofmega Cranksets......

Greetings Folks,

While looking for some parts for a Listmember, I found a box full of Ofmega cranksets which I had completely forgotten I had! I am only certain of one model (Master) but have pictures of all. I also have bottom brackets in both English and Italian threading (Ofmega and Miche) for anyone who may have a need. Figure $20.00 each for the bottom brackets......Here is what I have in cranksets/cranks: All, except the Master, are 144bcd with 170mm arms (9/16") - The two older cranks (with etched logos) are both used, but in VG condition. Prices include shipping (CONUS)

1) Used: 52x42 - etched Ofmega logo - inner ring is an Ofmega, while the outer is not. Rings Arms have retangular cutouts with small diagonal lines. No dustcaps. Interesting looking crankset. $40.00

2) Used: 52x41 - etched Ofmega logo - yes, this has a 41t inner ring and is a 144bcd crankset! Both rings are Ofmega - No dustcaps - nice classic looking crankset: $55.00

3) New: 52x42 - screened logo - 144bcd - with dustcaps - Lovely looking crankset: $70.00

4) New: Master: 52x42 - screened logo - 130bcd - with dustcaps - Nice crankset. $75.00

5) New: Arms only (144bcd/170mm) - no logo - these appear to be useable as a triple (chainring bolts included) as the spiders are drilled and tapped. Nice looking arms (beveled and polished) - Dustcaps included: $50.00