Re: [CR]Teledyne Titan queries

(Example: Racing:Wayne Stetina)

Date: Sun, 08 Jan 2006 15:53:22 -0500
From: <oroboyz@aol.com>
In-Reply-To: <MONKEYFOODsIjRBhOUi00004094@monkeyfood.nt.phred.org>
Subject: Re: [CR]Teledyne Titan queries
To: minneman@alum.mit.edu, Classicrendezvous@bikelist.org


<< Does anyone know if Teledyne Titan frame stickers have been reproduced?>>

Scott: Yes, those have been very nicely reproduced by a specialist bike decal screen printer.. They however must be obtained from a professional painter because the maker will not sell to the public. I would suggest going to Ed Litton & get him to obtain those for you. Shouldn't be much more than $50 for the set.

Dale Brown cycles de ORO, Inc 1410 Mill Street Greensboro, NC 27408 USA 336-274-5959 http://www.cyclesdeoro.com http://www.classicrendezvous.com Giant, Specialized, Bianchi, Felt, Orbea, Litespeed, Landshark, Townie and other exotica. National Bicycle Dealers Association Board member

-----Original Message----- From: Scott Minneman <slminneman@yahoo.com> To: 'CR' <Classicrendezvous@bikelist.org> Sent: Sun, 8 Jan 2006 11:39:28 -0800 Subject: [CR]Teledyne Titan queries

Does anyone know if Teledyne Titan frame stickers have been reproduced? I've poked around at the likely sites, and haven't found them yet. Probably time to just start phoning around, but I'd love to be pointed somewhere likely (or definite) to start with. I'm pretty sure that they were vinyl to begin with, so they could be done fairly easily by somebody with the patterns.

I have serial number 2062, a 24" frame...no cracks or repairs (but a mysterious small dent/tear in the seat tube, about midway down...clearly from trauma, not fatigue).

If I can't find replacement badges, I'll probably just run it as a bare frame, as a fixed gear...it looks incredible set up that way, and there are a couple of gearing options that work out really nicely (vertical drops, so one has to use Fix-Me-Up to identify workable combinations for the length of the stays (48-19 is about right for San Francisco)).

Finally, as a complete long shot...does anybody know of an original fork for a 24" Teledyne gathering dust anywhere? I know they had problems, but I thought I'd ask if there was a take-off gathering dust anywhere...maybe from a discarded frame that developed all of the other cracks these frames were famous for.

Cheers,

Scott Minneman
San Francisco, CA