Re:[CR]Removing excess threads from top tube cable clips

(Example: Production Builders:Peugeot:PY-10)

Date: Mon, 09 Jan 2006 14:57:06 -0800
From: "John Jorgensen" <designzero@earthlink.net>
To: classicrendezvous@bikelist.org
Subject: Re:[CR]Removing excess threads from top tube cable clips
References: <MONKEYFOOD5JQ35J9eV00001b70@monkeyfood.nt.phred.org>
x-mac-creator="4D4F5353"

...once told me that on new Masi bikes in the day folks often put a touch of yellow on them, too. Did I tell that right John? Wrote Tom Sanders

Yes, I did, also as seen on John Barron's NOS Masi on the velostuf site.

What we did at the bikeshop was install the clips first, then back out the screw, rethread the screw into a spare clip, cut then dress it in a grinder, then remove, which cleaned up the threads and reinstall on the bike. Paint to finish to arrest the rust from attacking. Helped keep the working end of the screw from finding a spot to bayonet as well. This was done when the shop owner was not looking as he thought it was frivolous. Small touches did keep the clients' happy though.

John Jorgensen
Torrance Ca