Re: [CR]Weyless Hub Info and Pic Needed

(Example: Framebuilders:Chris Pauley)

From: "Charles T. Young" <youngc@ptd.net>
To: <Classicrendezvous@bikelist.org>
References: <BAY107-F30E8BE91820F7962DA0B5DB00C0@phx.gbl>
Subject: Re: [CR]Weyless Hub Info and Pic Needed
Date: Sun, 5 Feb 2006 16:17:12 -0500
reply-type=response

>From a recent post by Steve Kurt to the iBOB list in response to someone else's box in the basement whatizzit question:

http://i1.tinypic.com/mwz9lc.jpg

Lightweight goodness.

Charlie Young
Honey Brook, PA


----- Original Message -----
From: Tony Zanussi
To: Classicrendezvous@bikelist.org
Sent: Saturday, February 04, 2006 10:15 AM
Subject: [CR]Weyless Hub Info and Pic Needed



> Found in a basement box of old parts a set of what I believe are late 70's
> Weyless hubs and was wanting to see a pic to verify they are. Anybody
> have a pic and/or any experience with these? I removed the outer circlip
> and dust shield from one sealed bearing and noted that although smooth
> they are probably dry. Any ideas on how to re-charge these sealed
> bearings with new grease to use these babies? Appears as if the bearings
> are press fit and probably hard to remove. The best part of this whole
> deal is that I don't even recall ever having these hubs and they just
> magically appeared when I was looking to build up a set of wheels! Almost
> as good as a great find at a garage sale! Thanks for any help.
>
> Tony Zanussi
> Kansas city, MO