Re: [CR]Campy Aero Levers

(Example: Component Manufacturers:Chater-Lea)

Date: Wed, 12 Apr 2006 09:21:32 -0400
From: "Norm and Val Lafleur" <nvlafleur@verizon.net>
Subject: Re: [CR]Campy Aero Levers
To: "Jerome & Elizabeth Moos" <jerrymoos@sbcglobal.net>, <Carb7008@cs.com>, <classicrendezvous@bikelist.org>
References: <20060412124006.19052.qmail@web82208.mail.mud.yahoo.com>
reply-type=original

The earliest Campy aero levers were the Cobalto ( C Record ) levers. These had the same pattern as the 50th anniversary levers but came with guide plates that inserted into the lever to allow either aero or non aero routing. The hoods had a hole in the top for the cables but came with a plug for use with aero routing. The hoods were unique for these levers. When Deltas became available a push button qhick release was added to the levers necessatating a slight cut away in the hood. The Cobaltos became available around 1986. This was a popular lever set for folks who wanted aero levers but also wanted to keep a full Campy set up so it was often seen with SR/NR calipers.

Norm Lafleur
Ashfield, Ma.


----- Original Message -----
From: Jerome & Elizabeth Moos
To: Carb7008@cs.com
Sent: Wednesday, April 12, 2006 8:40 AM
Subject: Re: [CR]Campy Aero Levers



>I don't think Super Record ever came with aero levers. The early C-Record
>levers, including a couple of pairs I have, allowed either aero or nonaero
>routing. Not sure if there were two different models of hoods, or if there
>was a perforated push-out for the top hole for nonaero.
>
> Regards,
>
> Jerry Moos
> Big Spring, TX
>
> Carb7008@cs.com wrote:
> I've noticed that one of my bikes has super record brakes with non-aero
> levers. Also, someone on Ebay is selling what they say are C-Record levers
> and
> they are not aero. Yet I remember buying Campy Aero Levers for one of my
> bikes
> in the early-80's. When did Campy aero levers come out and were they Super
> or
> C-Record?
>
> Jack Romans
> Sacramento, CA