Re: [CR]Tubulars

(Example: Production Builders:Peugeot:PY-10)

From: "Pete Geurds" <raleighpro@dejazzd.com>
To: <classicrendezvous@bikelist.org>
References: <00fa01c6d173$ed094610$0200a8c0@D8XCLL51>
Subject: Re: [CR]Tubulars
Date: Thu, 7 Sep 2006 08:13:34 -0400
reply-type=original

From: "ternst" <ternst1@cox.net> To: <classicrendezvous@bikelist.org> Sent: Wednesday, September 06, 2006 1:18 AM Subject: [CR]Tubulars


> When you inspect your basetape and it feels and looks like plain 'ol
> cotton, soft and porous, that's what it is.
> This is the one you need to coat! Only one coat is necessary.

Ted, Thanks for write-up. Some questions: You use the same glue as you use gluing tire to rim, correct? My LBS has Continental and Tubasti(I think). He seems to think they're interchangeable. Are they? I don't actually mix them, but if I remove and replace tire memory fails as to what's on rim from last gluing.

I've always coated both tire and rim. But still I've had a couple tires start peeling the base tape away from tire. Though maybe solvents used to clean rims was culprit. I've also had a tire come loose from base tape and rotate on rim under braking. Tape was glued to rim but tire slid on tape. Pointers appreciated. Thanks.

Pete Geurds
Douglassville, Pa