[CR]Re: E.A.3 or 650B mystery Mavic Module 4 rims

(Example: Framebuilding:Paint)

Date: Tue, 19 Sep 2006 05:42:44 -0700 (PDT)
From: "Fred Rafael Rednor" <fred_rednor@yahoo.com>
To: classicrendezvous@bikelist.org
In-Reply-To: <20060919050826.52111.qmail@web53702.mail.yahoo.com>
Subject: [CR]Re: E.A.3 or 650B mystery Mavic Module 4 rims

Steve,
     If these are bare rims, take a string or stiff wire and measure the diameter of the bead seat. These rims have an even number of spoke holes so you can pass your string/dowel/wire through opposite holes and get an accurate measurement.
     If the rims are already built up, use a piece of string to measure the diameter. Tape it down somewhere on the rim, and lay the string on top of the bead seat. Now measure the string and go to Sheldon's chart. Or divide by 3.14159, which Iassume is how Sheldon obtained the values for his chart.
     Have fun,
     Fred Rednor - Renowned String Theory expert in
       Arlington, Virginia (USA)


--- Steve Demchak wrote:


> Sheldon, I did measure the circumference, but my fiberglass
> tape kept dropping into the trough whenever I would take in
> the slack. I couldn't find my metal tape. Steve
>
> Steve "some measurements are easier in theory" Demchak
> Seattle, WA
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection
> around
> http://mail.yahoo.com
>
> _______________________________________________
>

__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com