At 08:30 PM 12/10/06 -0800, David Ross wrote:
>I just built up a pair of wheels for a project, using a pristine NOS pair
of older Brampton hubs (thanks again to one of the generous souls on this
list). The hubs have chromed steel barrels and large (high) flanges. The
rear is double-sided, one side for gears and the other for a fixed cog and
lockring.
>
>Imagine my surprise when all but one of my medium-sized collection of
older freewheels would not thread far enough on to the gear side of the hub.
I have one of those hubs.
http://www.wooljersey.com/
I just tried a 5-speed Suntour English thread freewheel on it and it threads on all the way, no problem. Of course, the hub is for 110mm rear spacing and there's no way I could use it with a derailleur freewheel, only a single speed, unless I got a longer axle and some spacers and put it in a frame with wider rear spacing.
John Betmanis
Woodstock, Ontario
Canada