[CR]FS: wheels

(Example: Framebuilders:Chris Pauley)

Date: Sun, 19 Mar 2006 12:31:39 -0800
From: "galen pewtherer" <dolface@gmail.com>
To: "Classic Rendezvous Bike List" <classicrendezvous@bikelist.org>
Subject: [CR]FS: wheels

cleaning out a few things in an attempt to make some room:

sunshine/windsor wheelset -- low-flange 36h sunshine pro-am hubs, laced 4x with straight-gauge spokes to windsor rims (no other label, have eyelets) with windsor sew-ups.

rear is spaced at 120mm, front 100mm, hubs have '11 76' and 'japan' stamped on them as well. hubs spin smoothly, and the finish is quite nice. rims have a little brake-wear, but not much. tires hold air, and appear to have a fair amount of life left in them, but should be re-glued, as i can pull them off very easily.

no skewers.

$80.00 plus shipping

campagnolo/ambrosio montreal front wheel -- 32h nr (at least i think it's nr, has the oil-clip and world-logo) low-flange hub, laced radially with dt straight-gauge spokes to an ambrosio montreal hard-anodized rim (sew-up).

some brake wear, but nothing too extreme.

wheel was used by me (130lbs) as a climbing/tt wheel back when i raced, and hasn't been abused, but the hub could use a good cleaning.

no skewer.

$40.00 plus shipping.

many thanks.

galen pewtherer san francisco, ca

--
-galen