I have this thing where I have to take the cogs off of a vintage freewheel body.
Not having a freewheel cog holder, I generally nail through the holes in the larger cogs to loosen the sprockets. Has worked most every time, except on one corncob.
Steven Johnson, Shiloh, IL
My remedy was to have a two pieces of 2" thick timber with a hole drilled so that when put side by side, the hole could surround the hub.
I then nailed 1" nails into the spoke holes into the timber so that the hub was then bonded to the timber.
_____________________________________________________________
Prices, software, charts & analysis. Click here to open your online
FX trading account.
http://track.juno.com/