Re: [CR]Information needed on skewer cap (screw on side)

(Example: Framebuilding)

From: <LouDeeter@aol.com>
Date: Sun, 29 Jul 2007 20:32:52 EDT
Subject: Re: [CR]Information needed on skewer cap (screw on side)
To: classicrendezvous@bikelist.org


In a message dated 7/29/07 8:26:12 PM, biankita@comcast.net writes:


> What year was the p-head screw on manufactured? I seem to have a lot of
> the caps that looks like a cone with a serrated band that runs along
> the middle (much more modern looking and less attractive in my
> opinion.)
> Garth, I recommend you buy (or borrow) a copy of the Campagnolo Catalogs that Chuck Schmidt sells on his website. If you buy the versions that describe the part this list follows, that is, up to 1983, then you will have part of the story. However, for completeness, I recommend you also buy the catalogs for post-83 which will show you pictures of some of the other skewers you may have in mind. Or, you can come to Orlando and see both which are in my library. Lou Deeter, Orlando FL

**************************************
Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour