Re: [CR]3Rensho lug photos

(Example: Humor)

Date: Fri, 07 Sep 2007 20:14:36 -0400
From: "Louis Schulman" <louiss@gate.net>
To: John Betmanis <johnb@oxford.net>
Subject: Re: [CR]3Rensho lug photos
References: <3.0.6.32.20070907192608.013230f0@mailhost.oxford.net>
In-Reply-To: <3.0.6.32.20070907192608.013230f0@mailhost.oxford.net>
cc: classicrendezvous@bikelist.org

Yes, the casting seam is clearly visible on the under side of the seat lug if you blow up the picture.

Obviously, the work on the entire bike is shoddy. I would just give it to Goodwill, along with the equally shoddy Masi double-plate on eBay. My only question is, why would you buy such a shoddy bike in the first place?

Louis Schulman Doing a sanity check in Tampa, Florida

John Betmanis wrote:
> At 06:52 PM 07/09/2007 -0400, Bianca Pratorius wrote:
>> Here are the photos I promised of the 3Rensho.
>> Note that the seat lug is much more refined then the
>> head tube lugs.
>>
>> http://www.flickr.com/people/bike_stuff/
>
> Looking at the seat lug (lug 5), I can see a bit of a gusset that could
> have been filed out if the builder had taken the trouble, making me think
> that the seat lug was not thinned either. In my opinion, that's how all the
> lugs were cast originally with little or no finish filing done. It just
> seems that the head lugs are thicker to start with. If you're going to have
> the frame refinished, examine it carefully after it's stripped to see if
> you should really do anything. This is probably something that has become a
> lot bigger in your mind than it actually is.
>
> John Betmanis
> Woodstock, Ontario
> Canada