Re: [CR]WTB: Campy rear hub axle needed.

(Example: Framebuilders:Bernard Carré)

From: "Andrew Bohlmann" <encantadas@pcisys.net>
To: "Andrew Bohlmann" <encantadas@pcisys.net>, "devotion finesse" <devotion_finesse@hotmail.com>, <classicrendezvous@bikelist.org>
References: <BAY119-W1835DB85AA45B00EBEBD7DF5B60@phx.gbl> <000e01c7ff0d$0fd47cb0$501035ce@hal>
Subject: Re: [CR]WTB: Campy rear hub axle needed.
Date: Mon, 24 Sep 2007 18:59:33 -0600
reply-type=response

Correction!!

The early '80's were a long time ago...

126.5mm was the norm (I think) for the inside to inside measurement of the rear wheel spacing (lock nut to lock nut). I'll have to go check my stash of Campagnolo 6-sp axles in my early '80's Campagnolo travel bag.

Andy Bohlmann
Colorado Springs, CO


----- Original Message -----
From: Andrew Bohlmann
To: devotion finesse


<classicrendezvous@bikelist.org> Sent: Monday, September 24, 2007 6:43 PM Subject: Re: [CR]WTB: Campy rear hub axle needed.


>I thought that early '80's were 126.5+/-mm???
>
> I've got some of those.
>
> Andy Bohlmann
> Colorado Springs, CO
> http://www.tourofcolorado.com
> http://www.sandcreeksports.com
>
> ----- Original Message -----
> From: "devotion finesse" <devotion_finesse@hotmail.com>
> To: <classicrendezvous@bikelist.org>
> Sent: Monday, September 24, 2007 5:33 PM
> Subject: [CR]WTB: Campy rear hub axle needed.
>
>
>>
>> Ladies and Gentlemen:
>> I'd like to replace the bent axle on an early 80's low flange Nuovo
>> Record
>> road hub. 134mm in length. Used is A-O-K.
>> I have parts available for trade, or cash if ya'd rather.
>> Thanks, gang.
>>
>> Matthew Bowne
>> Brooklyn, New York