Sheldon's site says it is not possible to install a French FW on an English hub without "considerable violence". You can thread the French FW on a couple of turns, but then it tightens up. I suppose with a lot of grease and a big enough wrench you might run it all the way on, but the damage to the hub would be considerable.
Regards,
Jerry Moos Big Spriing, TX
Crumpy6204@aol.com wrote:
What probelms could you run into if you try thread a French thread freewheel
on English thread hub? if you use plenty of grease Oil etc, will it go on OK
or will iit strip the thread on the Campy hub? Cheers John Crump
OldtightfirBrit, Parker. Co USA