In a message dated 1/4/07 1:11:17 PM, pbrueggeman@ucsd.edu writes:
>Please advise on tapping this brazeon
>out regarding thread specification and other matters (I assume a blind
>tap
>is used, but I'm not an expert).
Find your local British motorcycle shop and find out what the thread is. I'll
bet it's cycle thread. Your big problem will finding a bottoming-or plug-tap
but the shop might have one. Otherwise you might take a needle file, heat it
and put a little hook on the end and use it to try to clean the threads out
enough to thread the screw. I've done this but boy, it's a pain.
Good luck,
Phil Brown
San Rafael, Calif