Re: [CR]campy triple problem

(Example: Framebuilders:Pino Morroni)

From: "Aldo Ross" <aldoross4@siscom.net>
To: "Eric Meddaugh" <eric.m@rocketmail.com>, <classicrendezvous@bikelist.org>
References: <146358.40290.qm@web31804.mail.mud.yahoo.com>
Subject: Re: [CR]campy triple problem
Date: Mon, 8 Oct 2007 06:34:14 -0400
reply-type=original

Whoa! The nut should not protrude beyond the face of the middle chainring! There should be a counterbore (recess) on one face of the chainring... the outer ring of the nut sits down in this area. Is the middle chainring installed backwards? Take it apart and look for the recessed area.

Hope this helps.

Aldo Ross
Middletown, Ohio
USA


----- Original Message -----
From: Eric Meddaugh
To: classicrendezvous@bikelist.org
Sent: Monday, October 08, 2007 1:32 AM
Subject: [CR]campy triple problem



> Hello All,=0A=0AI've installed a Campy triple crank on my '78 Raleigh
> Comp.
> and the chain hangs up when on the small chainring. Here're some pix:=0A
> =0Ahttp://www.flickr.com/photos/ericm/sets/72157602300502794/=0A=0AThe
> chai
> n hangs on the inside nuts from the middle chainring. Is this thing set up
> properly? Do I need to get a special skinny chain? Any help is much
> appreci
> ated. Thank you.=0A=0AEric Meddaugh=0Aenjoying the fantastic fall weather
> i
> n=0ASan Carlos, CA