Re: [CR]campy triple problem

(Example: Framebuilders:Jack Taylor)

Date: Mon, 8 Oct 2007 22:41:12 -0700 (PDT)
From: "Eric Meddaugh" <eric.m@rocketmail.com>
Subject: Re: [CR]campy triple problem
To: Aldo Ross <aldoross4@siscom.net>, classicrendezvous@bikelist.org


Aldo, You are the man (as usual, I'm sure)! Not only the middle chainring w as backwards but the small ring too! All is well now thanks to you. Your he lp and knowledge are greatly appreciated. Eric Meddaugh San Carlos, CA
--
-


----- Original Message ----
From: Aldo Ross


To: Eric Meddaugh <eric.m@rocketmail.com>; classicrendezvous@bikelist.or g Sent: Monday, October 8, 2007 3:34:14 AM Subject: Re: [CR]campy tripl e problem

Whoa! The nut should not protrude beyond the face of the middle chainring! There should be a counterbore (recess) on one face of the chainring... the outer ring of the nut sits down in this area . Is the middle chainring installed backwards? Take it apart and look for the recessed area.

Hope this helps.

Aldo Ross
Middletown, O
hio
USA


----- Original Message -----
From: Eric Meddaugh


m@rocketmail.com> To: <classicrendezvous@bikelist.org> Sent: Monday, Oc tober 08, 2007 1:32 AM Subject: [CR]campy triple problem


> Hello All,

I've installed a Campy triple crank on my '78 Raleigh
> Comp.
> and the chain hangs up when on the small chainring. Here're some

pix:
>

http://www.flickr.com/photos/ericm/sets/721576023 00502794/

The
> chai
> n hangs on the inside nuts from the mi ddle chainring. Is this thing set up
> properly? Do I need to get a sp ecial skinny chain? Any help is much
> appreci
> ated. Thank you.

Eric Meddaugh enjoying the fantastic fall weather
> i
> n

San Carlos, CA