[CR]Re: Paramount P-13 vs P-15

(Example: History:Ted Ernst)

In-Reply-To: <MONKEYFOODPnqNI4lQ5000023f6@monkeyfood.nt.phred.org>
References:
From: "Thomas Dusky" <tdusky@comcast.net>
Date: Fri, 9 Nov 2007 10:14:11 -0500
To: classicrendezvous@bikelist.org
Subject: [CR]Re: Paramount P-13 vs P-15

Hello I have a '72 P13 Chrome That I purchased new. Winemann sidepulls came standard $50 extra for Campy sidepulls. A few years ago on club ride I came across another rider with a '72 P15 chrome same size frame 25 inch. I was interested in geometry differences, in comparing the bikes visually I found: More rake in the fork on the P15. Longer Chainstays on the P15. Angles seemed to be close to the same.

Racing bikes of this have the best rides!

Tom Dusky Huntington Woods MI


> OK. So the frame materials are the same -- but what about the
> geometry?
> Was there any difference between the frame of the "racing" P-13
> and the
> "touring" P-15, other than dropout eyelets?
>
> David
>
> David G. White
> Burlington, VT
>
> Matthew T Churches wrote:
>> David,
>> The P13 and P15 Paramounts materials were the same of that era
>> (Nervex
>> lugs and Reynolds 531 frame with Campagnolo droupouts). The P15 came
>> set up as a triple crank and often with centerpull brakes, 27"
>> clincher wheelsets, a wider range freewheel and different rear
>> derailleur. The P15 also has eyelets on the front and rear were the
>> P13 does not.
>> I want a P15 to go with the P13 (two right now) and the P14 I
>> currently own.
>> Matt Churches
>> Ann Arbor, MI
>>
>> David G. White writes:
>>> I'm researching the differences between the P-13 and P-15 circa
>>> 1972.
>>> The Waterford website has a Paramount history that includes the
>>> following:
>>> Paramounts grew to five models:
>>> * P-10 - Deluxe Paramount - designed for non-competition road
>>> riding
>>> and included front and rear eyelets, 27 x 1 1/4" clincher tires
>>> and Weinmann center pull brakes. It usually came with
>>> Campagnolo
>>> Record components. You could order it with Campy side pulls
>>> and/or
>>> custom geometry as an option.
>>> * P-11 - Paramount Tourist - designed for upright bars and
>>> recreational rides. It was available on a special order basis
>>> only. The ladies version was designated P61.
>>> * P-12 - This was the old designator for the Paramount Racer -
>>> now
>>> becoming the P10.
>>> * P-13 - Road Racing Paramount - designed for competition, this
>>> model came with tubulars and Campy sidepulls stock.
>>> * P-14 - Track - Full Campy track components including wide
>>> flange
>>> hubs and tubular tired wheels.
>>> * P-15 - Deluxe Paramount with 15 speeds (triple front
>>> chainrings).
>>> Start with the P-10 and add a wide gear range (generally a
>>> Shimano
>>> or Huret) long cage derailleur.
>>> My question is: circa 1972 was there any difference between the
>>> frame
>>> of the P-13 and the P-15 (tubing, geometry, etc)? Or were the
>>> differences solely with regard to the equipment with which the bike
>>> was built?
>>> Best,
>>> David
>>> David G. White
>>> Burlington, VT