Re: [CR]Love is in the air !


Example: Framebuilders:Alberto Masi

From: "David Snyder" <dddd@pacbell.net>
To: "Classic Rendezvous" <classicrendezvous@bikelist.org>
References: <DMEJIHDFKPCMMPJEINFDEENHFOAA.otis@otisrecords.com> <000a01c82a69$464cf380$0202a8c0@Leo> <013f01c82a71$b0daf5f0$0300a8c0@D1>
Subject: Re: [CR]Love is in the air !
Date: Mon, 19 Nov 2007 01:56:18 -0800
reply-type=original

That's it. Use a very thin screwdriver or rod, or thick wire, doesn't have to go in for the whole length, just an inch or two. Then I spray alcohol in there, pull the driver out and twist the grip back and forth to quickly distribute the alcohol throughout the bar/grip interface.

David Snyder Auburn, CA

-Dee Gordon wrote:


>I have a pair of grips that I need to take off without ruining them. Any
> ideas on that? I was thinking about sticking something under like a blunt
> screwdriver and then spraying some soapy water in there to make it
> slippery
> and then working around it, spraying again. Any ideas?

>

> Thanks,